MustangWorks.com : Ford Forums - View Single Post - What do u think of The Holley systemax 2 kit

Grn92LX · 05-05-2002, 09:29 PM

Holley must have not updated their site because the new holley heads are 2.02/1.60 valves. The older heads had oil issues so they changed the design. The cam has also been changed but I think its the cam you listed which is the lunati 51014 cam. Cant comment on the kit cause I dont have it, but IMO that holley intake is a HUGE overkill for a small streetable 302. IMO its more suited for ported heads and bigger cams with 6k+ shift points. The holley lower comes set up for a fel-pro 1262 gasket while most aftermarket street alum heads/lower intakes are set up for 1250 gaskets. Fwiw, I run the full TFS combo and like it. I'm hoping to hit the track Wed night in hopes for 12's @ 110. A little more info on your car would be good too, like is it auto or 5spd, vert or not?? Any mods? Later,

Mike

05-05-2002, 09:29 PM	#2
Grn92LX Registered Member Join Date: Mar 2002 Location: Long Island, NY Posts: 55	Holley must have not updated their site because the new holley heads are 2.02/1.60 valves. The older heads had oil issues so they changed the design. The cam has also been changed but I think its the cam you listed which is the lunati 51014 cam. Cant comment on the kit cause I dont have it, but IMO that holley intake is a HUGE overkill for a small streetable 302. IMO its more suited for ported heads and bigger cams with 6k+ shift points. The holley lower comes set up for a fel-pro 1262 gasket while most aftermarket street alum heads/lower intakes are set up for 1250 gaskets. Fwiw, I run the full TFS combo and like it. I'm hoping to hit the track Wed night in hopes for 12's @ 110. A little more info on your car would be good too, like is it auto or 5spd, vert or not?? Any mods? Later, Mike __________________ TFS heads/FTI custom cam/TFS street heat, Longtubes, 373's, MM lca's, Tokico springs/shocks