View Single Post
Old 05-14-2002, 08:18 PM   #5
Mike Wolking
Registered Member
 
Join Date: Nov 2001
Location: Northern Kentucky
Posts: 49
Default

If you are going with rear drums then i don't know the offset that you will need for the rears. If you would like to run a cheep disc upgrade in the rear I recall seeing an add in MM&FF mag for rear dics conversions around $300 bucks or less. I know that front brakes are the main stopping power but adding rear discs is a huge improvement, escpecially with all the power that you are producing.

I have four wheel discs so i have to run the 6.42 offset on the rears. Anyway if you are going with silver 17x9 cobra's my part numbers are M1007R58 for the fronts(5.95) and M1007M179 for the rears (6.42). I don't know what you have found for prices but gefracing.com has the 'R58's for 179.95 a piece and houstonperformance.com has the 'M179's for 175.00 a piece. I searched for about a month and that was the cheepest I could find them.

As far as seeing pics in the user's rides section, go to user's rides and under the heading "username search" type my name in exactly how it appears and it will take you to my ride. Good luck-Mike
__________________
90 coupe, Cobra brakes, 17x9 cobras MM lowers, SVO uppers, 3.73s, BBK 1 3/4 full lengths, H pipe, flows, subframes, H&R springs, Tokico 5-ways, Pro 5.0. Subframes, K&N, Strut brace, CC plates,83K miles, New Paint.....FOR SALE!
Mike Wolking is offline   Reply With Quote