MustangWorks.com : Ford Forums - View Single Post

Rev · 05-16-2002, 05:36 PM

I actually had to cut 1/4 off the passenger side front coil spring (Magna 620) to make the ride height equal in the front.

If you do that, use a cut off wheel rather than a cutting torch, and don't do it all at once so as to not cut off too much. I cut 1/8 turn and reinstalled the spring and then took it out again to cut 1/8 more. Lots of work, but it's exactly right now.

Rev

05-16-2002, 05:36 PM	#6
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	I actually had to cut 1/4 off the passenger side front coil spring (Magna 620) to make the ride height equal in the front. If you do that, use a cut off wheel rather than a cutting torch, and don't do it all at once so as to not cut off too much. I cut 1/8 turn and reinstalled the spring and then took it out again to cut 1/8 more. Lots of work, but it's exactly right now. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe Last edited by Rev; 05-16-2002 at 05:41 PM..