MustangWorks.com : Ford Forums - View Single Post - Well, here is my new combo, AFM cam specs inside

BigMike1 · 05-21-2002, 03:19 PM

I went with the Anderson N-113 cam.

It has the following specs:
Intake / Exhaust
Advertised Duration 337 345
Duration at .050 270 278
Lobe lift @ cam .360 .360
Gross lift w/ 1.6's .576 .576
Valve lash Hot .000 .000
Lobe seperation 108
Camshaft centerline 104 112

Rest of the combo is below. I am looking for 6700 rpm shiftpoints and 120+mph in the quarter mile.

This is the same cam Anderson used to make 458rwhp on one of there 347's.

Any thoughts guys.

05-21-2002, 03:19 PM	#1
BigMike1 Registered Member Join Date: May 2002 Posts: 3	Well, here is my new combo, AFM cam specs inside I went with the Anderson N-113 cam. It has the following specs: Intake / Exhaust Advertised Duration 337 345 Duration at .050 270 278 Lobe lift @ cam .360 .360 Gross lift w/ 1.6's .576 .576 Valve lash Hot .000 .000 Lobe seperation 108 Camshaft centerline 104 112 Rest of the combo is below. I am looking for 6700 rpm shiftpoints and 120+mph in the quarter mile. This is the same cam Anderson used to make 458rwhp on one of there 347's. Any thoughts guys. __________________ 92 LX White CHP 347, AFR 205's, AFM N-113 cam, Edel Vic 5.0 intake, 76 C&L, 75 AF TB, Mac 1 3/4 Lt's, Mac 3" PC hpipe, Mac 3"CB, 4.10's, Ponies with Nitto's, Custom Chip, 42lb inj's