MustangWorks.com : Ford Forums - View Single Post - My car all but died and won't wake back up!?!

PKRWUD · 05-24-2002, 01:27 PM

That's a real easy test, but in case you aren't sure, I'll tell you what to do.

1) Disconnect the 60 pin connector from the ECM.
2) Test for KOEO voltage between pins 1 and 40 or 60 at the 60 pin connector. If you get 10.5 vdc or more, the ECM is bad. If you don't get 10.5 vdc, start tracing the wires and find the open circuit.

Take care,
-Chris

05-24-2002, 01:27 PM	#13
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	That's a real easy test, but in case you aren't sure, I'll tell you what to do. 1) Disconnect the 60 pin connector from the ECM. 2) Test for KOEO voltage between pins 1 and 40 or 60 at the 60 pin connector. If you get 10.5 vdc or more, the ECM is bad. If you don't get 10.5 vdc, start tracing the wires and find the open circuit. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!