MustangWorks.com : Ford Forums - View Single Post - My car all but died and won't wake back up!?!

DRASTiK · 05-25-2002, 04:14 PM

Well, here's the results I came up with.

the pin 1 and pin 60 readouts were 11.88 KOEO and 12.11 key off.

test VPWR and GND - 11.72

MAF SIG and MAF RTN - no reading

MAF SIG and GND - no reading. Anything that involved the SIG (D) wire, got no reading whatsoever.

backprobe MAF - have no idea how to do that.

A quick lesson on DMM's probably wouldn't hurt anything either. I just bought my first one today. For ohms, I set the DMM to 20K, so if that's not the right setting, then call me an idiot and tell me the correct setting.

05-25-2002, 04:14 PM	#21
DRASTiK Registered Member Join Date: May 2001 Location: Yuma, AZ Posts: 536	Well, here's the results I came up with. the pin 1 and pin 60 readouts were 11.88 KOEO and 12.11 key off. test VPWR and GND - 11.72 MAF SIG and MAF RTN - no reading MAF SIG and GND - no reading. Anything that involved the SIG (D) wire, got no reading whatsoever. backprobe MAF - have no idea how to do that. A quick lesson on DMM's probably wouldn't hurt anything either. I just bought my first one today. For ohms, I set the DMM to 20K, so if that's not the right setting, then call me an idiot and tell me the correct setting. __________________ Dave 88 GT - 13.4@106 on street tires (2.2 60ft) My Stang RHC member #75 My stang is FOR SALE!! Last edited by DRASTiK; 05-25-2002 at 04:33 PM..