MustangWorks.com : Ford Forums - View Single Post

Mr 5 0 · 05-28-2002, 09:20 AM

five-point.ohhh:

Agree with PKRWUD on this one.

No real advantage to the MSD box if you're near stock. Just get good plug wires, keep the plugs, cap & rotor fresh and you'll be fine.

I have a near-stock 5.0 and the only ignition 'mods' I've done are the above (Taylor Spiral-Pro wires). I did replace the stock coil with a Crane PS-91 (at about 90,000 miles) just as a maintenance issue. Runs great.

05-28-2002, 09:20 AM	#4
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Stock ignition rocks! five-point.ohhh: Agree with PKRWUD on this one. No real advantage to the MSD box if you're near stock. Just get good plug wires, keep the plugs, cap & rotor fresh and you'll be fine. I have a near-stock 5.0 and the only ignition 'mods' I've done are the above (Taylor Spiral-Pro wires). I did replace the stock coil with a Crane PS-91 (at about 90,000 miles) just as a maintenance issue. Runs great.