MustangWorks.com : Ford Forums - View Single Post - SN-95 plus an Explorer intake...how?

fiveohpatrol · 06-06-2002, 10:38 PM

I love my intake, it is perfect for ported stock heads or some GT40's. But if you were to with some bigger TFS or AFR heads then I'd look elsewhere for an intake.

The upper bolts up with no problem at all. Just be carefull torqing it down on the corners, they have a reputation of breaking off (mine did last time i had it off, but just welded it back together)

The elbow is all you should need for it to work on yours.

good luck,

-Drew

06-06-2002, 10:38 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	I love my intake, it is perfect for ported stock heads or some GT40's. But if you were to with some bigger TFS or AFR heads then I'd look elsewhere for an intake. The upper bolts up with no problem at all. Just be carefull torqing it down on the corners, they have a reputation of breaking off (mine did last time i had it off, but just welded it back together) The elbow is all you should need for it to work on yours. good luck, -Drew __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft