MustangWorks.com : Ford Forums - View Single Post

Tomzilla · 06-19-2002, 03:40 AM

Surely not the fastest here but my combo recently turned 12.43 @ 110.56 mph on 4 yr old 26x8.5 et drags. It's a simple and relatively inexpensive setup:

Completely stock bottom end
Mildly worked GT40 irons w/double springs decked .040
Custom cam .556/.557 int/exh lift, 226/228 dur. @ .050, 112 lsa
Edelbrock Performer RPM intake(stock)
70mm t-body
76mm C&L w/elbow
1 5/8" longtubes,Prochamber, 2 ch Flows
30# injectors
4.30 gears

I still haven't tuned it properly yet but it ran the 12.43 without powershifting(granny @ 5800 rpms) and leaving @ 4500 rpms(5 spd).
With some tuning I fully expect 112-113 trap speeds and driven more aggressively(powershifting!!) I hope to crack the 11's all on motor.

06-19-2002, 03:40 AM	#37
Tomzilla Registered Member Join Date: Dec 1999 Location: Large cardboard box under a bridge, Hi Posts: 21	Surely not the fastest here but my combo recently turned 12.43 @ 110.56 mph on 4 yr old 26x8.5 et drags. It's a simple and relatively inexpensive setup: Completely stock bottom end Mildly worked GT40 irons w/double springs decked .040 Custom cam .556/.557 int/exh lift, 226/228 dur. @ .050, 112 lsa Edelbrock Performer RPM intake(stock) 70mm t-body 76mm C&L w/elbow 1 5/8" longtubes,Prochamber, 2 ch Flows 30# injectors 4.30 gears I still haven't tuned it properly yet but it ran the 12.43 without powershifting(granny @ 5800 rpms) and leaving @ 4500 rpms(5 spd). With some tuning I fully expect 112-113 trap speeds and driven more aggressively(powershifting!!) I hope to crack the 11's all on motor. __________________ 1990 ex-chp Coupe. Mildly ported Twisted wedges, custom cam,Holley SysteMax intake, 1 5/8" longtubes, Mac prochamber, Flows,Tremec 3550, 4.30's,Griggs subframes, C&L 76mm, 30# injectors,70mm t-body etc. Best e.t. [b]11.94 @ 113.03 mph with 1.488 60ft Last edited by Tomzilla; 06-19-2002 at 03:51 AM..