Autometer electric FP gauge install question
I am in the process of installing this gauge. My question is this. The line running from the sending unit to the box show only 4 wires being hooked into the box. When I spliced into my line from the electric sending unit there are 5 wires! WTF. There is a red, black, bare wire, white and a very pale green. What is this pale green wire? Thanks for the help. I just don't want to ruin a brand new gauge.
Thanks!
__________________
91 Coupe with fresh rebuild. Running Stage 2 Avenger heads (51cc chambers), Stage 2 cam (.549, .566)1.72 Crane Gold Race rockers, Port matched GT-40 upper & lower, 75mm Bullet MAF, 65mm Accufab TB, MSD 6AL, Long Tubes through off road and 2 chamber flowbastards. Stock T-5, 3.73 gears, Center Line Convo-Pros with skinnies up front. My baby is now bottle fed!!! Best time on the motor was 12.92 at 109.57.
UPDATE - Getting Ready to install: Tremec 3550, Blowproof Bellhousing, Strange Shocks/Struts, Moroso Springs, Upper/Lower control Arms, 31 spline axles and new differential. After this..... 347 heart transplant and Rollcage.
|