MustangWorks.com : Ford Forums - View Single Post - tfs intake, tfs valve covers, NOTHING FITS

Hozer 88GTConv · 06-28-2002, 12:12 AM

You will probably need a 1" spacer between your upper and lower manifold.
Additionally, you may need either to get an EGR "blank-off" plate which is considerably thinner, mine's only 1/2". If your EGR system is intact, you simply need to modify the throttle linkage bracket my removing/trimming the lower portion of the bracket.

Isn't it fun when they don't tell you everything?
Good luck.

06-28-2002, 12:12 AM	#4
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	upper/lower spacer... You will probably need a 1" spacer between your upper and lower manifold. Additionally, you may need either to get an EGR "blank-off" plate which is considerably thinner, mine's only 1/2". If your EGR system is intact, you simply need to modify the throttle linkage bracket my removing/trimming the lower portion of the bracket. Isn't it fun when they don't tell you everything? Good luck. __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy