MustangWorks.com : Ford Forums - View Single Post - MSD 6-AL and BTM Problem

Chipdog · 05-18-2001, 05:41 PM

My car stopped running after sitting for a week. It would crank but it wouldn't start up. I checked and the plugs were not getting any juice. I took off the plug that connects the MSD and the BTM and connected it back to just the stock ignition and it starts fine. I reconnected them and again and checked all the connections and still no go. Is there any way to see if its a bad wire or a bad box? Any help would be great.

------------------
92 GT Convertible
K&N, Hooker Headers, H-Pipe, Flow Masters, B&M Holeshot 3k converter, 4.10s, BBK 1.5 drop, 73mm Vortech Mass air, 65 FMS TB, B&M Super Cooler trans cooler, FMS Aluminum radiator

And a Small Blow Job

05-18-2001, 05:41 PM	#1
Chipdog Registered Member Join Date: Apr 1999 Location: Miami,Fl USA Posts: 297	MSD 6-AL and BTM Problem My car stopped running after sitting for a week. It would crank but it wouldn't start up. I checked and the plugs were not getting any juice. I took off the plug that connects the MSD and the BTM and connected it back to just the stock ignition and it starts fine. I reconnected them and again and checked all the connections and still no go. Is there any way to see if its a bad wire or a bad box? Any help would be great. ------------------ 92 GT Convertible K&N, Hooker Headers, H-Pipe, Flow Masters, B&M Holeshot 3k converter, 4.10s, BBK 1.5 drop, 73mm Vortech Mass air, 65 FMS TB, B&M Super Cooler trans cooler, FMS Aluminum radiator And a Small Blow Job