MustangWorks.com : Ford Forums - View Single Post

Fostang · 07-05-2002, 07:20 PM

Do engine harnesses change year to year? If so could this be the culprit. I pulled some codes and it says code 85 for a purge valve malfuction but I checked it off the car and it's operating correctly. I then checked the voltage at the line and there is none at anytime off,on,etc. Just dead. No other faulty codes. Since I did a MAF conversion on this harness code 95 comes up since I didn't wire up the FP monitor. Thats where I think that the engine harness isn't linking up to the rest of the harness correctly.

07-05-2002, 07:20 PM	#2
Fostang Registered Member Join Date: Feb 2001 Location: Stockton, Ca Posts: 599	Do engine harnesses change year to year? If so could this be the culprit. I pulled some codes and it says code 85 for a purge valve malfuction but I checked it off the car and it's operating correctly. I then checked the voltage at the line and there is none at anytime off,on,etc. Just dead. No other faulty codes. Since I did a MAF conversion on this harness code 95 comes up since I didn't wire up the FP monitor. Thats where I think that the engine harness isn't linking up to the rest of the harness correctly. __________________ 67' Fastback-Supercharged 4.6 DOHC Cobra, T-56, 8.8 more to come. 67' Coupe-EFI, AOD, 8.8 90 Gt-Supercharged,MAF,TB,1.7's ripper, bassani x, 3.55's, 01' cobras, headers. 89'GT-Supercharged,Heads,Cam,Intake,TB,MAF,power pipe,headers,offroad exhaust,black bullits.