Yeah, I'm sorry Chris I should have been more clear, that is exactly what i did. When I did it to the other cylinders, the idle dropped showing the cylinder stopped firing, but when i did it to 1,2,8,& 6 nothing happened. I pulled the plugs to see them and they were wet with fuel like they aren't firing. I can take the plug out while the wire is still on it, start the engine and it fires then. Seems like it doesn't want to fire while it is in the cylinder?! I was reading the other post about the guy having problems with the revving and driving, that is what I had, no power under load, so that is when I checked for spark on all the cylinders and found this problem. the wires and new and so are the plugs, don't remember if I mentioned that. thanks again
__________________
|