yea, i used the spacers on the drivers side rail and i have it plugged with the plug that came with the rail, but its still not fitting in. i even took out the screws to move the rail out farther, but the injectors are at enough of an angle to leak going into the intake.
__________________
88 Conv Vortech S-trim 2.5" 10-rib pulley, 332 stroker w/ Cat forged crank, forged JE flat-tops, forged rods, 10.25:1 comp, DSS girdle, edelbrock heads, Omega valvetrain, Lunati custom cam, extrude honed Cobra intake, 70mm T-body, Pro-M 77, bypass valve, dual Walbro 255 lph in tank pumps, an -8 fuel hose, aeromotive fuel rails/regulater. 42# inj, MSD ingniton/boost retard, JBA headers, flowmasters, full Griggs GR-40R suspension (K-member, torque arm, panhard bar, subframes, strut brace) Centerforce clutch, Tremec, Auburn posi locker, moser axles, Baer brakes/rotors, 17" cobra R wheels, custom body/roll bar
|