MustangWorks.com : Ford Forums - View Single Post - Looking to beef up my 8.8 right the first time!

93 Cobra needs input · 07-23-2002, 06:18 PM

I'm in the process of rebuilding my 8.8 and want to do it right. I'm thinking, Moser 31 spline axles, SVO 31spline posi, maybe Auburn-Pro, any suggestions which differentials are good,strong? All new bearings and a girdle with studs. I'm eventually looking to run high 10's on the rear end. Do I need 35spline axles? I have disc breaks in the rear so I really don't need the c-clip eliminator kit. I want the rearend strong and only do this once. Successful mustanger's drop me some hints, THANKS!

07-23-2002, 06:18 PM	#1
93 Cobra needs input Registered Member Join Date: Oct 2001 Location: Madelia,MN USA Posts: 58	Looking to beef up my 8.8 right the first time! I'm in the process of rebuilding my 8.8 and want to do it right. I'm thinking, Moser 31 spline axles, SVO 31spline posi, maybe Auburn-Pro, any suggestions which differentials are good,strong? All new bearings and a girdle with studs. I'm eventually looking to run high 10's on the rear end. Do I need 35spline axles? I have disc breaks in the rear so I really don't need the c-clip eliminator kit. I want the rearend strong and only do this once. Successful mustanger's drop me some hints, THANKS! __________________ 331 stroker, JE 8.5:1 pistons, H-beam rods, steel crank, main cap, msd with 3step, BBK ceramic long tubes,TKO, 4.30's, motorsport Z303, Victor Jr aluminum heads, crane gold 1.6, southside lift bars, 90/10 front, 50/50 rear, centerforce dual friction clutch, Vortech S-trim soon.