If you adjust the timing and the rpm's drop to low, there is an idle setting on the throttle body linkage. If you look at the underside of the throttle body where the gas pedal cable attaches to the throttle body there is a 3/8 inch throttle stop bolt.(i only know its 3/8 inch cuz i just got done playing around with mine) Turn it clockwise and it opens the throttle body a little bit and increases your idle, turn it counterclockwise and it will drop your rpm's even more. Hope this helps.
__________________
'89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression.
If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout.
RICER HATERS CLUB MEMBER 87!
www.ricehatersclub.com
|