1. Make sure that the lifter is riding on the heal of the cam
2. Hand tighten the the rocker down while turning the pushrod back and forth until the pushrod won't turn.
3. give the rocker nut 1/2 turn then lock it down. (sets the preload.)
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor
93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe
Ricer hater's club member #49
|