MustangWorks.com : Ford Forums - View Single Post

Jeff65 · 08-26-2002, 01:12 PM

I have a stock '67 289 fan and fan pulley but no spacer. I don't know if this would help you. Do you have a stock crankshaft pulley or aftermarket? The stock one is pressed sheet metal and some of the aftermarket ones are cast iron.

Classic Auto Air may be able to help you with replacement pulleys. They're in Tampa, FL. Do an internet search for their phone number.

When I set up my FRPP 302, I had to modify some of the brackets and use some spacers to get correct alignment.

08-26-2002, 01:12 PM	#2
Jeff65 Registered Member Join Date: Jul 2002 Location: Oklahoma City Posts: 208	I have a stock '67 289 fan and fan pulley but no spacer. I don't know if this would help you. Do you have a stock crankshaft pulley or aftermarket? The stock one is pressed sheet metal and some of the aftermarket ones are cast iron. Classic Auto Air may be able to help you with replacement pulleys. They're in Tampa, FL. Do an internet search for their phone number. When I set up my FRPP 302, I had to modify some of the brackets and use some spacers to get correct alignment.