Dark Knight: The weather was about 3 degrees cooler (74) and the humidity was 100% both times. Of course tonight it's 60 degrees and 70% humidity. 
I believe the slicks were 1/2 inch taller. They were Hoosier 26x9's.
Badazz89LX:
I had just installed a 31 spline Eaton w/Superior axles along with the 4.10's. There was no way I was going to use slicks w/stock axles. A friend of mine twisted the end off a stock axle on Nitto's two weeks ago!!
I have heard good/bad about the chips. The over-the-counter chips are crap, but I have heard good things about custom chips that are burned while on the dyno.
There is no doubt I will make 12's pretty easily. I should be able to the 60' down in the 1.7 range when I get a few things sorted out (transmission, control arms, driving ability,etc.) Plus my torque boxes weren't in real great shape before last night, so they're probably in really bad shape now! I'm shooting for 12.80's when I get everything sorted out.
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc.
286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune
Race weight : 3090 # w/ driver
New Best - 12.82@107.9 w/1.74 60'
|