Basically what would happen is I would start up the car and it the idle would jump up and down and it would idle uncontrollably. If I were to take off and drive it a block or two then come to a stop then it would idle fine. If I were to shut the car off for a few minutes then start it up it would have a difficult time starting. I would have to take the gas pedal and press it to the floor while rolling it over. It would then start but idle rough again. I called a place called, Auburn Performance and he told me it was because the computer has a difficult time running the cam. He sold me a custom chip and it made some other changes to the computer also. I put the chip in and it started right up and idled fine. Well it did idle a little rough but that was the lope of the cam
I never had any trouble after that. I would highly recommend getting a chip. I am not talking about a hypertech chip either. I dont know how these work and as far as I know its a generic program. I had to tell these guys everything I had done to my car. They then made the chip of my info.