Being a body guy, I run into this every now and again. Trust me, it sucks, even if you done a few. Just a few questions, Does the out side door handel "feel" like its attached to any thing or does it flop around? What about the inside? Sometimes the rods get bent up and jam up the works. Is it unlocking? Not what you want to hear, but the trim panel sometimes just has to come off. Work around the seat and pry at it. You might wreck it. Hopefully you can go to a wrecker and get one cheap if you do. Have fun.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
|