MustangWorks.com : Ford Forums - View Single Post - Do you want AFRs and a cam on a stock bottom?

87lx58 · 09-23-2002, 11:58 AM

Stock bottom/stock 302 forged pistons flycut, AFR 185 58cc heads angle milled to 50cc, AFM high rev N-71 cam, Holley intake, 65mm TB, 30lb injectors, long tubes, chip and 4.10 gear. This car is a Factory GT running 26" slicks and shifting at 6500 rpm. Time is 11.72@114 mph

09-23-2002, 11:58 AM	#14
87lx58 Registered Member Join Date: Sep 2002 Location: pace.fl Posts: 5	AFR's Stock bottom/stock 302 forged pistons flycut, AFR 185 58cc heads angle milled to 50cc, AFM high rev N-71 cam, Holley intake, 65mm TB, 30lb injectors, long tubes, chip and 4.10 gear. This car is a Factory GT running 26" slicks and shifting at 6500 rpm. Time is 11.72@114 mph