First, sounds good, like you put some thought in it. The only thing I have to say is: stock fly wheel?? At the horsepower your running, I think thats kind of dangerous.
Just a guess. But I'd say about 450 ish HP. I have a run amost the same thing on the dyno, eccept: 351w, roller cam almost same spec, 9.5:1.700 holley. It made 430HP at 6000 and was still going very strong. I saw 450 on the sceen alot during the test, but we cut it off at 6K. maybe at 6200 it would have hit 450. Should be a screamer.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
|