MustangWorks.com : Ford Forums - View Single Post

dragstang86 · 10-09-2002, 07:48 PM

My mph is low in the quarter (13.30 @99 with a 1.75 60ft leaving from an idle) and the car stops pulling on top end and think it might not be getting enough fuel? I still have 19lb injectors and the original MAF. Im getting ready to buy a Pro-M MAF so i was gonna upgrade injectors at the same time if needed? But with these mods what injectors should i be using? Would i gain anything by going with a 24lb?

306
c-4 tranny 3500 stall
gt-40p heads
cobra intake - ported lower
E303 cam
roller rockers
70mm throttle body
bbk fender well
shorties
x pipe
flowmasters
msd 6a
pullies
373's

thanks for the help,
bryan

90lx
86 coupe

10-09-2002, 07:48 PM	#1
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	what injectors to use? My mph is low in the quarter (13.30 @99 with a 1.75 60ft leaving from an idle) and the car stops pulling on top end and think it might not be getting enough fuel? I still have 19lb injectors and the original MAF. Im getting ready to buy a Pro-M MAF so i was gonna upgrade injectors at the same time if needed? But with these mods what injectors should i be using? Would i gain anything by going with a 24lb? 306 c-4 tranny 3500 stall gt-40p heads cobra intake - ported lower E303 cam roller rockers 70mm throttle body bbk fender well shorties x pipe flowmasters msd 6a pullies 373's thanks for the help, bryan 90lx 86 coupe