MustangWorks.com : Ford Forums - View Single Post

Bobasaurus · 10-29-2002, 10:34 PM

I think stock 5.0 TB is 50 or 55MM. The explorer TB is noticable bigger.

The early 5.0 explorers 1996-1997 have the EGR passages even though they are not used. You can tell when you take the upper off. Look for the little black hole in the middle.

Also you can get some good GT-40P or GT40 heads off those engines.

10-29-2002, 10:34 PM	#1
Bobasaurus Registered Member Join Date: May 2002 Location: South Carolina Posts: 58	TB and intake I think stock 5.0 TB is 50 or 55MM. The explorer TB is noticable bigger. The early 5.0 explorers 1996-1997 have the EGR passages even though they are not used. You can tell when you take the upper off. Look for the little black hole in the middle. Also you can get some good GT-40P or GT40 heads off those engines. __________________ Bobasaurus 1987 LX 5.0 - Engine Rebuild now installed - 26290 Wonderful Miles so far Items now installed from the garage : GT-40p heads, Explorer Intake, FMS "P" headers, Crower 15511, SFI Balancer, 24#, SPEC Stage 1, T5z, 65MM TB, 77MM Pro-M, 255lph Pump