Quote:
Originally posted by dinomite:
Cool! tell me if your ever coming down here, and i'll talk to you if i go up there some time!
Now, anyone want to tell me how to install all this stuff (heads and cam), or if i can do it. As i said before, i've done water pump, rear upper and lowers, and springs and shocks all around.
|
No problem, if I wasn't super busy I'd come down and help you install that stuff. Check out Cranes website, they have some good info on cam swaps, and how to set rockers. Your heads will come with install instructions as well. Just take your time and label anything you are not really familar with, us a bead of silicone on the front and back of the lower instead of the supplied cork seals.
------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
FIRST TIME OUT 12.16@111 WHEELS-UP