Thread: 99gt 300rwhp!!
View Single Post
Old 11-05-2002, 12:14 PM   #17
99gt-ujstlst
Registered Member
 
Join Date: Nov 2002
Location: san jose ca
Posts: 3
Default Re: 99gt 300rwhp!!

Quote:
Originally posted by cneovyper
I know that my stock GT has 260hp. Thats at the (what)?? I think from what I have read people are getting about 235-240 RWHP. My goal for now is 300RWHP. So how can I acheive this? Please only serious answears only. I really take replies seriously so thanks everyone...


cneo

well it all depends on you and how much cash you have
but it can be done
every one will say add a S/C or NOS
but you can do it all motor

you would need to have the heads worked on ported and polished, new or reground cams, long tube headders, bigger injectors, fuel pump, and of course all the regular bolt ons, and a tuned chip
that should get you to 300rwhp if you want more mill the heads some to up the compression more or you can swap out your pistons and replace them with a 10.5:1 pistons

hope this helps
__________________
SOUTH BAY STANGS
CAFORDS.COM

Paxton Supercharged runing 17+psi BOOST ,Bullit Intake, Fasttrack AIR to AIR intercooler, BBK long TUBE,MAC prochamber, Steeda Tri-ax Shifter, Steeda Sprort Springs,2 Walbro 255lph inline fuel pump,CPR 5/8 custome fuel rails,CUSTOME fuel system, Phantom Boost Gauge, Autometer Fuel Pressure Gauge, accufab single bladeThrottle Body, 2 Chamber Flows, 87mm MAF, 50lb Injectors,{{{{{{ Cobra Crank, Brc Forged alluminum Pistons (35 over), Steel Rods}}}}}port and polished heads,reground cams,valves,and valve springs Cobra Fly Wheel, SPEC stage IV clutch, AFS Cobra R's Wheels 9" Front and 10.5" in back with some BF dragradials
99gt-ujstlst is offline   Reply With Quote