MustangWorks.com : Ford Forums - View Single Post - Car wont start after injector swap PLEASE HELP

Chipdog · 11-11-2002, 04:16 PM

OK first off I have spark and I do have fuel pressure. I have tested with a noid light and it did not light up so the injectors are not being told to turn on. I have pulled apart the 10 pin and they are clean no corrations.
Where do I go from here?

Background
I just wapped to GT-40 heads and an Performer intake. I installed 30 lbs injectors but it was running too rich so I dropped down to 24s and now it wont start.

Thanks for the help
I just want to drive my car again its been too long
Chip

11-11-2002, 04:16 PM	#1
Chipdog Registered Member Join Date: Apr 1999 Location: Miami,Fl USA Posts: 297	Car wont start after injector swap PLEASE HELP OK first off I have spark and I do have fuel pressure. I have tested with a noid light and it did not light up so the injectors are not being told to turn on. I have pulled apart the 10 pin and they are clean no corrations. Where do I go from here? Background I just wapped to GT-40 heads and an Performer intake. I installed 30 lbs injectors but it was running too rich so I dropped down to 24s and now it wont start. Thanks for the help I just want to drive my car again its been too long Chip __________________ 92 GT Convertible Hooker Headers, Headman X pipe, Flow Masters, 4.10s, BBK 1.5 drop, 73mm Mass air, 65 FMS TB, FMS Aluminum radiator, T-5 swap with a Steeda shifter. And a 9 pound Blow Job