MustangWorks.com : Ford Forums - View Single Post - AFR 165's or other heads with cam and stock induction

Mustang_GT_90 · 11-23-2002, 10:07 PM

Yeah, most of the people I know are launching like this without having problems. I know somebody pulling 1.60, 60' with the stock axles. The stock T5 seems to go before the axles.
I shift at 4900 on motor, when I'm running on motor the gas doesn't come off the floor for the entire pass.
On nitrous I've tried 5500, 4900, and every where in between. Last time I was at the track the 12.44 came from 5200 RPM. Seems to be about right.

11-23-2002, 10:07 PM	#12
Mustang_GT_90 Registered Member Join Date: Apr 2002 Posts: 68	Yeah, most of the people I know are launching like this without having problems. I know somebody pulling 1.60, 60' with the stock axles. The stock T5 seems to go before the axles. I shift at 4900 on motor, when I'm running on motor the gas doesn't come off the floor for the entire pass. On nitrous I've tried 5500, 4900, and every where in between. Last time I was at the track the 12.44 came from 5200 RPM. Seems to be about right. __________________ 90 Mustang, full weight, 5 speed, pulleys, 3.73 gears... 13.33@101 mph on stock motor and DOT's 12.44@112.5 on the juice. Check out our clubs website at http://www.stanggang.com