MustangWorks.com : Ford Forums - View Single Post - Trick-Flow and e303 need rocker help.

PKRWUD · 06-29-2001, 09:06 PM

Check it with clay, but it should work fine. 1.7 rockers will bring your lift up to .529, and 1.73's will put it at .538. It's hard to get a straight answer from Trick Flow, but the general concensus there is that up to .540 lift is safe. You would be a fool to do it without checking it with clay first, no matter what anybody tells you.

Take care
~Chris

------------------
Retired Moderator
MustangNet
My site: JimPorterRacing
RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

06-29-2001, 09:06 PM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Check it with clay, but it should work fine. 1.7 rockers will bring your lift up to .529, and 1.73's will put it at .538. It's hard to get a straight answer from Trick Flow, but the general concensus there is that up to .540 lift is safe. You would be a fool to do it without checking it with clay first, no matter what anybody tells you. Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!