MustangWorks.com : Ford Forums - View Single Post - Anyone here port there stock heads intake?

Dark_5.0 · 12-10-2002, 06:06 PM

My stock heads are ported, polished and milled with a 3 angle valve job and trick flow springs.

I installed those along with a GT-40P intake and knocked off 7 tenths in the 1/4 and gained a few mph.

I have well over $600.00 in my stock heads but I out run lots of cars with AFR and trickflow heads.

Its worth it if you do it right.

12-10-2002, 06:06 PM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	My stock heads are ported, polished and milled with a 3 angle valve job and trick flow springs. I installed those along with a GT-40P intake and knocked off 7 tenths in the 1/4 and gained a few mph. I have well over $600.00 in my stock heads but I out run lots of cars with AFR and trickflow heads. Its worth it if you do it right. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer