MustangWorks.com : Ford Forums - View Single Post

93 Cobra needs input · 01-01-2003, 02:39 PM

I'm getting my 331 stroker ready for spring and have decided the Cobra intake may be to small for my combo. I have read alot of good and bad about that intake and need some good advice which intake would be my next logical step up. I'm thinking TFS-R or the performer RPM I think the true victor intake powerband is out of my rpm range. The car will see alot of track time shift point 6,500 with 4:30 rear end gears and the victor jr heads, I'm sure the heads are way big for now but I want to have 9psi boost on the motor by early summer. Thanks for your advice.

01-01-2003, 02:39 PM	#1
93 Cobra needs input Registered Member Join Date: Oct 2001 Location: Madelia,MN USA Posts: 58	Looking for a good high flow intake! I'm getting my 331 stroker ready for spring and have decided the Cobra intake may be to small for my combo. I have read alot of good and bad about that intake and need some good advice which intake would be my next logical step up. I'm thinking TFS-R or the performer RPM I think the true victor intake powerband is out of my rpm range. The car will see alot of track time shift point 6,500 with 4:30 rear end gears and the victor jr heads, I'm sure the heads are way big for now but I want to have 9psi boost on the motor by early summer. Thanks for your advice. __________________ 331 stroker, JE 8.5:1 pistons, H-beam rods, steel crank, main cap, msd with 3step, BBK ceramic long tubes,TKO, 4.30's, motorsport Z303, Victor Jr aluminum heads, crane gold 1.6, southside lift bars, 90/10 front, 50/50 rear, centerforce dual friction clutch, Vortech S-trim soon.