Quote:
|
When you see where the oil mark is, get a punch and a hammer, and punch a dimple at the top of the oil line. This is now your new, accurate dipstick
|
Good point pkrwud.
Somtimes people put a different length tube(Universal) which could be a little longer and make the level show low b/c the stick isnt going in far enough.....another way is to take the measurement difference off the stick and mark the difference on the top of the tube,,,,,, get a tubing cutter and cut off the difference off the top of the tube...this will allow the stick to go in further and read accurately on the stick.
__________________
AFR 1492 heads,Track Heat Intake, d.s.s super pro bullet 331, lakewood bell, king cobra, 3550 ,UPR shifter, aluminum shaft, 4.10, 31-spline, spool,hoosier27x10, moroso ds-2, 175-juice, egt...11.40 on motor spray pass coming.
|