MustangWorks.com : Ford Forums - View Single Post

fiveohpatrol · 01-13-2003, 04:38 PM

the bottom of this page lists some flow data for mass air sensors and throttle bodies.
http://www.kellnet.com/chambers/intake_flow.htm

going by this data, and assuming that the diameter is in linear proportion to the flow rate, then here's what a couple other TB's would most likely flow
80mm: ~960CFM
85mm: ~1070CFM

is that of any help?

01-13-2003, 04:38 PM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	the bottom of this page lists some flow data for mass air sensors and throttle bodies. http://www.kellnet.com/chambers/intake_flow.htm going by this data, and assuming that the diameter is in linear proportion to the flow rate, then here's what a couple other TB's would most likely flow 80mm: ~960CFM 85mm: ~1070CFM is that of any help? __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft Last edited by fiveohpatrol; 01-13-2003 at 04:44 PM..