I really don't think you could do it at home. They are bubble camber/caster guages out there, but good ones arn't cheap. It takes a bit of pratice to get a good at it too. I've seen alot guys do really crappy jobs. And tires aint cheap, just take somewhere that you can get a copy of it. Ask first! I hope you can read one, just because the numbers say they are in spec, does not mean it was a good job, you have to look at the whole thing.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
|