MustangWorks.com : Ford Forums - View Single Post - Any rocker arm valve cover clearance probs with TFS TW heads?

DZEE'S LX · 03-14-2003, 12:14 AM

I went with Crane 1.7's w/ pedestal mounts, E cam, and older style Twisted Wedges.
I remember hearing that the v covers on the HO would clear them but decided to get the Trick Flow standard height covers just for looks. This may not be true if you are not using pedestals. The only PIA was that you have to buy their oil filler cap kit or get a generic oil cap/filler.

You oughta call Trick Flow. They have probably been asked that question hundreds of times.

Dan

03-14-2003, 12:14 AM	#2
DZEE'S LX Registered Member Join Date: Jan 2001 Location: Salt Lake City Posts: 117	I went with Crane 1.7's w/ pedestal mounts, E cam, and older style Twisted Wedges. I remember hearing that the v covers on the HO would clear them but decided to get the Trick Flow standard height covers just for looks. This may not be true if you are not using pedestals. The only PIA was that you have to buy their oil filler cap kit or get a generic oil cap/filler. You oughta call Trick Flow. They have probably been asked that question hundreds of times. Dan __________________ Spec Service (UHP), BFG G-Force KDW's, Turbo Coupe 3.55 rear w/disks, 73mm calipers, Stg 1 Twisted Wedges, TFS Street Intake, 70mm TB, E cam, Crane 1.7's, Aeromotive FPR, BBK 1 5/8 shorties, elec fan, FMS Al Radiator, Moroso Wires, Kenne Bell Ramair, March pulleys, Race Magnums, 190 lph Walbro, FMS Al Dshaft, D/S loop, MM 4point rollbar, FMS C spngs, strut tower brace, Tokico Illuminas, Prothane bushings, MM Lwr Conrol Arms, KB welded subs, Cervini Mach 1 hood/valence/side skirts/wing/airdam.