MustangWorks.com : Ford Forums - View Single Post

red82gt · 04-01-2003, 03:59 AM

The screw part should be sticking out of the hole in the bottom of the control arm. Put the screw thing through the hole and then pivot the sping onto the upper perch. My guess is you either don't have it compressed enough or you haven't lowered the control arm far enough.
I put a set of eibach drag launch springs in my buddy's 99 GT and we had to really reef on the compressor to get it to compress enough.

04-01-2003, 03:59 AM	#8
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	The screw part should be sticking out of the hole in the bottom of the control arm. Put the screw thing through the hole and then pivot the sping onto the upper perch. My guess is you either don't have it compressed enough or you haven't lowered the control arm far enough. I put a set of eibach drag launch springs in my buddy's 99 GT and we had to really reef on the compressor to get it to compress enough. __________________ 393W: AFR 205's, hydraulic roller, TKO600.