MustangWorks.com : Ford Forums - View Single Post - Anyone have a external Aeromotive or Cartech fuel system please help

go4it · 07-23-2001, 08:29 AM

Some fuel systems have a filter before and after the pump. Some with one filter usually have the filter after the pump. I would verify that the pump is installed right, then I would take the outlet hose off of the pump and put a short hose on it, stick the hose in a jug or something to catch the fuel and run the pump. Here is a link to a typical fuel system if it works. http://www.geocities.com/MotorCity/Pit/7713/fuel.htm
------------------
93GT, S-trim (2.95 pulley), SFMU, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 42lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, FMS aluminum radiator, MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.

[This message has been edited by go4it (edited 07-23-2001).]

07-23-2001, 08:29 AM	#8
go4it Registered Member Join Date: Sep 1998 Location: Wise,Va. Posts: 248	Some fuel systems have a filter before and after the pump. Some with one filter usually have the filter after the pump. I would verify that the pump is installed right, then I would take the outlet hose off of the pump and put a short hose on it, stick the hose in a jug or something to catch the fuel and run the pump. Here is a link to a typical fuel system if it works. http://www.geocities.com/MotorCity/Pit/7713/fuel.htm ------------------ 93GT, S-trim (2.95 pulley), SFMU, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 42lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, FMS aluminum radiator, MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter. [This message has been edited by go4it (edited 07-23-2001).]