MustangWorks.com : Ford Forums - View Single Post - Please Help! Installing Lincoln Mark VII calipers

go4it · 07-25-2001, 10:29 PM

I just put them on a few weeks ago and had no problems. I asked for 91 Lincoln Mark VII and that I wanted the ones with the steel pistons. Certain years they are all probably the same. Does your hoses have the banjo type fitting, like a bolt with a hole drilled in it and uses two copper washers. The hose has like a square block with a hole thru the center of it. The Rayloc #'s are 42-4025 left, 42-4024 right. The Bendix #'s are R55247S left, R55246S right. Is it possible you got them crossed, right side one on the left and vice versa.

------------------
93GT, S-trim (2.95 pulley), SFMU, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 42lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, FMS aluminum radiator, MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.

07-25-2001, 10:29 PM	#4
go4it Registered Member Join Date: Sep 1998 Location: Wise,Va. Posts: 248	I just put them on a few weeks ago and had no problems. I asked for 91 Lincoln Mark VII and that I wanted the ones with the steel pistons. Certain years they are all probably the same. Does your hoses have the banjo type fitting, like a bolt with a hole drilled in it and uses two copper washers. The hose has like a square block with a hole thru the center of it. The Rayloc #'s are 42-4025 left, 42-4024 right. The Bendix #'s are R55247S left, R55246S right. Is it possible you got them crossed, right side one on the left and vice versa. ------------------ 93GT, S-trim (2.95 pulley), SFMU, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 42lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, FMS aluminum radiator, MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.