I think the 30# injectors might be a bit to much for those few of things you mentioned.
Is it a 5-speed or auto? If its a 5speed I would go with a set of 3.73 gears. If its an auto go with 4.10.
Then go with some headers and a h-pipe, then some type of mufflers. Then get a MAF and a bigger TB, I think a 75mm like you mentioned might also be a bit big for the limited amount items you listed. So go with a 65mm or 70mm. Dont forget underdrive pulleys. Then after you get some more money saved up, go after a intake and a set of heads.
------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.
|