New cam
Well since the clutch started slipping on my car i decided to do a few other things while it was all out. I decided to swap to a new roller cam and replace the old style hydraulic cam. I went with the comp cams extreme energy 274hr-12. With the roller rockers i have it should bring it up to about .600" lift exhaust and about .589" intake. The only thing i have to make sure that i have the clearance with the pistons. I wish i would have got the better forged pistons instead of the speed pro 273 hypereutectic's. But i guess ill find out when i roll the motor over on the stand.
|