MustangWorks.com : Ford Forums - View Single Post

Dark Knight · 07-04-2003, 12:09 PM

there's not much porting needed on the AFR's.. not really needed either... RPM intake, 750DP and a cam with about .540 lift would scream..

of course, if you put it all on a stock 86 short block, you're going to have to notch the pistons..

07-04-2003, 12:09 PM	#4
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	there's not much porting needed on the AFR's.. not really needed either... RPM intake, 750DP and a cam with about .540 lift would scream.. of course, if you put it all on a stock 86 short block, you're going to have to notch the pistons.. __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg