View Single Post
Old 07-16-2003, 12:05 AM   #14
wolverine1
Registered Member
 
Join Date: May 2003
Location: Orlando FL
Posts: 25
Default

A stock fuel system 255 pump in tank in BBK is not enough to support 750 rwhp. That puts your car around 825 fly wheel. If my calculation is right, you will need more than 42 pound injectors and a lot more fuel. I blew my first motor with 42 pound injectors and I only had 585 rwhp. That was around 650 to the fly wheel. I had two pumps 255 and a in line T-Rex. I had to upgrade to a complete fuel system with 10 lines 8 return and 2 weldon 2025 and 55 pound injectors. You should take your car to a different Dyno because it's giving you the wrong numbers. You would have blown your motor on the first pass.
__________________
WILLIE
95 COBRA
DART SHORT BLOCK
VICTOR JR HEAD
77# INJECTOR
FUEL SYSTEM
Vortech YS Trim
Viper T56
15psi 690 rwhp 702 tq pump gas
25psi 863.6 rwhp 946 tq C16 race
Build by LaMotta Performance (407) 695-4549
Microtech Management By C-F-T(321)235-9959
wolverine1 is offline   Reply With Quote