MustangWorks.com : Ford Forums - View Single Post - Which Master Cylinder do I use in Rear Disc Upgrade

QuantumMotorsports · 07-17-2003, 01:04 PM

i would think your master cylinder would work, you need an adjustable proportioning valve definately. You can get these at Summit or Jegs, and they are relatively cheap. They allow you to adjust the amount of pressure that is applied to the front and rear brakes to balance them.

07-17-2003, 01:04 PM	#2
QuantumMotorsports Registered Member Join Date: Jul 2000 Location: Norman, Oklahoma, USA Posts: 597	i would think your master cylinder would work, you need an adjustable proportioning valve definately. You can get these at Summit or Jegs, and they are relatively cheap. They allow you to adjust the amount of pressure that is applied to the front and rear brakes to balance them. __________________ Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites