Thread: Lordy< Lordy!
View Single Post
Old 07-24-2003, 02:14 PM   #2
Simi Stang
Guest
 
Posts: n/a
Default jetting

That sucks that the NOS tech. guy was rude. You should have called back and hoped, or asked...to talk to someone else. I've talked to some very knowledgeable & helpful people at NOS. I have some nitrous jetting info. for you...but unfortunately I left it at home. I'm at work right now. But I still don't know the specific #s for the 125 shot, sorry. The only #s I remember off of the top of my head are for the 175 shot...73 (nozzle) and 38 (vacuum T). Which, according to NOS tech, is the highest hp shot you can run on our 5115 dry kit. I'm not sure about the 125...but the 150 shot jets were 60 something (nozzle) & 40 something (vacuum T). So the 125...my guestimation would be 50 something at the nozzle and...I really have no clue for the T. Actually maybe you should just try calling NOS tech again. They should be able to give you the jetting #s no problem. Because the jetting #s I have at home that I can't remember...are for the 150 shot I believe. Sorry I was of no help really. Did the NOS tech guy mention anything about the shim (part#17933-S) that goes in the nitrous regulator that is supposed to be used in our kit for any nitrous shot over 100hp? It's been years since I've had my system apart (maybe it's time to give it a once over...) but I'm almost positive I have the shim in there... It's supposed to put more pressure on the spring in the nitrous regulator (the big blue thing next to the solenoids) which in turn boost the flow of nitrous into the motor. If it's not in there the system will still work...because it doesn't have to do with the fuel pressure...but you could possibly run a lean condition...which is obviously dangerous, especially when using the laughing gas. So you might want to double check on that. But beware...two of the biggest speed shops around my area (one of them P.A.W.) couldn't even pull up that part# in their system for that shim...and aparently the guys working at the shops knew nothing about it. Kind of strange, being that the NOS 5115 kit has been around for years. You may have to order it straight from NOS if you don't have one.

Shad-
  Reply With Quote