MustangWorks.com : Ford Forums - View Single Post - can i mess this up not knowing what im doing?

1jimmy__d · 07-30-2003, 12:40 PM

i want to change the speedo gear i received in the mail. tellm if this sounds right sd to what i am going to do.

1)jack the left front end up with the small *** stock jack
2)find the cable that goes into the tranny?
3)unscrew the bolt that holds it in
4)pull it out gently
5)find the other gear, pull it out and replace it
6)reverse everything else

Am i missing anything or is this it? Never done this before so I thought I would ask if i could ruin something before i try it! Thanks,
Jim

07-30-2003, 12:40 PM	#1
1jimmy__d Registered Member Join Date: Apr 2002 Posts: 299	can i mess this up not knowing what im doing? i want to change the speedo gear i received in the mail. tellm if this sounds right sd to what i am going to do. 1)jack the left front end up with the small *** stock jack 2)find the cable that goes into the tranny? 3)unscrew the bolt that holds it in 4)pull it out gently 5)find the other gear, pull it out and replace it 6)reverse everything else Am i missing anything or is this it? Never done this before so I thought I would ask if i could ruin something before i try it! Thanks, Jim __________________ 90 lx hatch, holley systemax II kit, rebuilt 302, BBK 155 lph fuel pump, pro M bullet mass meter wtih BBk cold air intake, 30 # injectors, 70 mm TB, jacobs ignition system, edelbrock water pump, BBk longtube headers with h-pipe, flowmasters, b&m ripper shifter, 3.55 gears, Proform electric fan, subframe connectors/removed smog pump and ac! 75 shot of nitrous! 13.2 at 112 1/4 mile- no traction!