MustangWorks.com : Ford Forums - View Single Post - Front seal removal on C-4

Shaggy · 08-12-2003, 07:48 AM

You can buy a seal removal tool but in reality they aren't much different then a bent screwdriver, the harder part is the installation of the new on unless you have a really long tube that is the same diameter as the seal you have to very carefully install it by working your way around the edge of and be sure to put a liberal amount of grease on the inside of the seal before you in stall it. Not so much grease that it is sloppy buut enough that the torqie convertor has a good ring of grease to ride against.

08-12-2003, 07:48 AM	#3
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	You can buy a seal removal tool but in reality they aren't much different then a bent screwdriver, the harder part is the installation of the new on unless you have a really long tube that is the same diameter as the seal you have to very carefully install it by working your way around the edge of and be sure to put a liberal amount of grease on the inside of the seal before you in stall it. Not so much grease that it is sloppy buut enough that the torqie convertor has a good ring of grease to ride against. __________________ A good plan, violently executed now, is better than a perfect plan next week. George S. Patton, General (1885-1945)