Quote:
Originally posted by 88workcar
Before all else install a HR266HR TUST ME on this
|
I'd say use the NX274HR, it is meant for a blower motor. Lift is .555/.570 you might need to notch the piston, or retard it a little. I am using the XE274HR. going to be staying N/A though. If you are worried about clearance, the NX264HR would be a good cam as well .512/.512, and is better than the E303. With the blower I'd say 10's are possible. I'd also think about ditching the Cobra intake for an RPM intake.
here is info on the cams:
XE series
http://www.compcams.com/catalog/152_153.html
NX series
http://www.compcams.com/catalog/154_155.html