MustangWorks.com : Ford Forums - View Single Post

Smokedawg · 08-12-2001, 08:02 PM

I got my motor today and I wanted to check a few things...I took off the heads and its not a roller motor..I found some markings on the valve cover but couldnt find any on the block itself...I will look some more tomorrow..
The markings on the valve cover says: 2K318AA
Then the calibration #: 1-20N-R10
Then it had C44 punched in it.
It also said 8 degrees..

The motor was previously set up as a carb..

So what year of a motor am I dealing with?

I know it came out of a truck.

Can I make it a roller motor, I have a set of roller lifters for it and a X303 cam that I can put into it.

THANKS FOR ANY ADVICE!!

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

08-12-2001, 08:02 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	What year and type of motor do I have.. I got my motor today and I wanted to check a few things...I took off the heads and its not a roller motor..I found some markings on the valve cover but couldnt find any on the block itself...I will look some more tomorrow.. The markings on the valve cover says: 2K318AA Then the calibration #: 1-20N-R10 Then it had C44 punched in it. It also said 8 degrees.. The motor was previously set up as a carb.. So what year of a motor am I dealing with? I know it came out of a truck. Can I make it a roller motor, I have a set of roller lifters for it and a X303 cam that I can put into it. THANKS FOR ANY ADVICE!! ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.